Mini Monitor for Raspberry Pi 5 3.5 Inch Monitor with Metal Case and Cooling Fan 320 x 480 Pixels Resistive Touchscreen TFT LCD Display

- 【Touchscreen Monitor】3.5 inch touchscreen display designed for Raspberry Pi 5, with sensitive resistive touch. The screen is directly connected to SPI. It supports 125 MHz SPI signal input. - 【Display】480 x 320 pixels, 50 fps rates, stable signal, no flickering of the screen. It is able to play videos and games. - 【Cooling Fan】The touchscreen has a built-in fan to keep the Raspberry Pi from getting too hot. There is a install-able brass pillar to prevent the screen from tilting. - 【Case】Screen case fits in your hand. Bottom corners with rubberized non-slip feet and can be cushioned. Cooling holes at the bottom. Supplied with a cover to be installed when screen is removed. Note: If the screen and Raspberry Pi are connected in the wrong position, the case will not close. Please correct this immediately to avoid damaging the screen. - 【Driver Must】The driver must be installed on the screen, otherwise ONLY white is displayed. Please find the installation steps from the video and from the following information. - 【OS Support】Currently only the Raspbian operating system is supported.

Product description

learning

DIY

First Way:

The first video

The Second Method

The second video

Working with Kali, Ubuntu, Retropie system

The third video

We provide a Raspbian OS system with drivers, which can be installed directly into the Raspberry Pi 5.

Step 1: install the latest official RASPBIAN image of system

Step 2: Plug-in Micro SD Card, Connect network, keyboard, mouse and computer screen.

Step 3: Install the Driver. A:Login to the Raspberry Pi and open the terminal B:Enter the code to install the driver.

Step 4: Connect the 3.5”screen Align top side to insert the LCD Screen and power Raspberry Pi 5, and Screen will begin work.

Currently the driver does not support the above operating systems, please continue to update the driver~~.

In order to prevent the screen from being tilted by the force, we have designed the screen for the screw post interface and screws, which can ensure that the screen works stably.

Because the SPI is occupied by the 3.5" screen, we designed the power connector and fan fixing nut on the screen. Ensure that the Raspberry Pi can continuously dissipate heat when working.