youyeetoo BPI-R3 WiFi 6 Router Development Board with MediaTek MT7986 Chip 2GB DDR RAM 8GB eMMC Flash Dual GbE LAN for IoT Router Projects M.2 Key-E PCIe Interface (Banana pi R3 Router Board Kits)

- MediaTek MT7986A (Filogic 830) quad-core Arm Cortex A53 processor with hardware acceleration engines for Wi-Fi offloading and networking. Gigabit ethernet router. - Wifi 6 4x4 2.4G Wifi(MT7975N) +4x4 5G Wifi(MT7975P) 2x SFP 2.5GbE/ 5x RJ45 GbE - Bananapi BPI-R3 supports running the latest stable OpenWrt 23.05 version. This means you can customize the router as you prefer and install any applications you want, while greatly reducing signal interference. - 2 GB RAM / 8GB EMMC Support mircoSD slot/ 26 PIN GPIO/ MINI PCIE/ M.2 Key M - Provide OpenWRT 21.02 wifi 2.4G and 5G working fine.support nand flash ,SD card ,eMMC flash boot.

Product description

BPI-R3 Router Development Board

About BPI-R3

BPI-R3 hardware interface:

HardWare Specification of BPI-R3

BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard,It is a very high performance open source router development board,support Wi-Fi 6 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.

Tips:

In subsequent packages, we will replace the heatsink with a cooling fan

You can get stronger cooling performance

How to install openWRT?

Banana pi R3 currently has official mainline support, please refer to the wiki.